Typical Plow Weights

How much does my Meyer plow weigh, you ask? Here are the complete weights listed in Meyer sales brochures.

In the future we will add the weight of each moldboard (moldboard weights below, scroll down) with the Sector, A Frame, Angle Rams, and Trip Springs attached.

 

Model 5.0′ 6.0′ 6.5′ 7.0′ 7.5′ 8.0′ 8.5′ 9′ 10′
STEEL Definitions
TM = Two Meter
TML = Two Meter Light Duty
ST = Standard
C = Commercial
DP = Drive Pro
LP = Lot ProTMP = Two Meter Poly
STP = Standard Poly
CP = Commercial Poly
DPP = Drive Pro Poly
LPP = Lot Pro Poly

TM
420443
TML
425ST
639656
STL
520C769803816837
DP
400405 (6’8″)575
LP
733820835843

865

POLY
TMP
455481
STP
691708
CP
841928951980
DPP620
LPP853904925935
All weights are measured in Pounds. These are close estimates. Weights do vary based on components chosen, and vehicle specific mountings.

 

When a Meyer Distributor or Dealer orders a complete plow, it is made up of (7) seven components. They are:

Mounting Carton – This is the vehicle specific mount. It also depends on the mounting system selected (EZ Classic, EZ Plus, Drive Pro, Xpress, etc).

Moldboard – Steel, Stainless Steel, or Poly, full trip (listed in the table above) or trip edge. Meyer Diamond Edge are trip edge blades (and not listed here yet).

Sector A Frame / Power Angle Frame (SAF or PAF)

Clevis Lift Frame (CLF)

Hydraulic Carton – E-58H for straight blades, the carton includes Angle Rams and Controller..

Plow Lights – Nite Saber, or Nite Saber II

Headlight Adapters – Vehicle Specific. Some vehicles require additional components (typically GM vehicles).

The weights listed above are the combined weight of these components. Your Distributor or Dealer then assembles your plow system. They do not come from Meyer assembled.

Meyer Plow Moldboard Weights

 

Model 5.0′ 6.0′ 6.5′ 7.0′ 7.5′ 8.0′ 8.5′ 9′ 10′

11′

STEEL  

Definitions

TM = Two Meter
TML = Two Meter Light Duty
ST = Standard
C = Commercial
DP = Drive Pro
LP = Lot Pro
LPS = Lot Pro Stainless
RP = Road Pro

TMP = Two Meter Poly
STP = Standard Poly
CP = Commercial Poly
DPP = Drive Pro Poly
LPP = Lot Pro Poly
RPP = Road Pro Poly

 

TM 133 157 180
TML 128
ST 235 252
STL 194
C 299 333 346 367
DP 118 134 (6’8″) 180
LP 280 353 371 390

512

LPS 502 556
RP 588

636

684

POLY
TMP 192 218
STP 284 304
CP 371 408 431 460
DPP 256
LPP 404 446 469 493

569

RPP

625

All weights are measured in Pounds.
Above Meyer Moldboard weights include shoes and cutting edges. NOT SAF / PAF.

 

Here they are by Meyer part number:

 

Moldboard Part Number, Model, Size, Steel or Poly. Weight
09102 MB TM 6.5 STEEL
09103 MB TM 6.0 STEEL
09200 MB AG-7.5 AGGRESSOR
09205 MB AG-8.0
09208 MB SV-8.5 RIGHT WING SUPER-V
09209 MB SV-8.5 LEFT WING SUPER-V
09212 MB SV-9.5 RIGHT WING SUPER-V
09213 MB SV-9.5 LEFT WING SUPER-V
09217 MB SV 8.5 (KIT: 09208/09209)
09220 MB AG-8.5
09226 MB SV 9.5 (KIT: 09212/09213)
09231 MB SV2 8.5 LEFT WING FLARE
09232 MB SV2 8.5 RIGHT WING FLARE
09233 MB SV2 8.5 (KIT: 09231&09232)
09234 MB SV2 9.5 RIGHT WING FLARE
09235 MB SV2 9.5 LEFT WING FLARE
09236 MB SV2 9.5 (KIT: 09234&09235)
09237 MB SV2 10.5 (KIT: 09279/09280)
09238 MB HM 9.0 STEEL
09239 MB HM 10.0 STEEL
09240 MB C 7.5 STEEL COMMERCIAL
09242 MB TMP 7.0 POLY
09243 MB STP 7.0 POLY
09244 MB STP 7.5 POLY
09245 MB CP 7.5 POLY
09246 MB CP 8.0 POLY
09249 MB HMP 10.0 POLY
09252 MB CP 9.0 POLY
09258 MB VECTOR:2 WNGS (09254,09255)
09270 MB DP 6.0 STEEL DRIVE PRO
09274 MB DP 6.8 STEEL DRIVE PRO
09275 MB DP 7.5 STEEL DRIVE PRO
09278 MB DPP 7.5 POLY DRIVE PRO
09285 MB RP 10.0 STEEL USE 09287
09286 MB C 8.0 STEEL COMMERCIAL
09287 MB RP 10.0 STEEL ROAD PRO
09288 MB RPP 10.0 POLY ROAD PRO
09290 MB RP 11.0 STEEL ROAD PRO
09299 MB RP 9.0 STEEL ROAD PRO
09320 MB DP 5.0 STEEL DRIVE PRO
09327 MB SVLD-7.5 LEFT WING SUPR-VLD
09328 MB SVLD7.5 RIGHT WING SUPR-VLD
09329 MB SV LD 7.5 (KIT:09327&09328)
09400 MB LP 7.5 STEEL LOT PRO
09401 MB LP 8.0 STEEL LOT PRO
09402 MB LP 8.5 STEEL LOT PRO
09403 MB LP 9.0 STEEL LOT PRO
09404 MB LPP 7.5 POLY LOT PRO
09405 MB LPP 8.0 POLY LOT PRO
09406 MB LPP 8.5 POLY LOT PRO
09407 MB LPP 9.0 POLY LOT PRO
09408 MB LP 10.0 STEEL LOT PRO
09409 MB LPP 10.0 POLY LOT PRO
09410 MB LPS 8.0 STAINLESS LOT PRO
09411 MB LPS 9.0 STAINLESS LOT PRO
180
157
278.58
368.41
241
243
259
261
492
372.18
530
243
241
504
259
261
540
597
520
566
299
218
284
304
371
408
588
460
390
117.45
134
179.5
255.83
636.22
333
636.22
625.3
684.81
588
110
130.25
130.25
300
280
353.29
371.14
390.13
404.427
445.659
468.603
493.292
512
569
501.82
555.83

 

Additional Definitions – AG = Aggressor, HM = Heavy Municipal, SV = Super V Plow
SV2 – Super V2, SVLD – Super V Light Duty (for 1/2 ton trucks).